Vendor: Thimbles and Acorns
Type: Cloth doll
Price: 7.99

This adorable Rabbit Doll is specifically designed to fit in standard 18” doll clothes and shoes. This means your Rabbit Doll can share your 18” doll's wardrobe. As an added bonus, a 6” mini version is included with this pattern that is just the right size for your 18” doll to play with! This 6” doll fits in the outfits included in Thimbles and Acorns Charlotte and Pandora doll patterns as well as most of the 6” and 8” doll outfits found in the larougetdelisle catalog.

The simple design of the Rabbit doll means it sews up quickly and adapts well to a variety of medium weight woven fabrics. It can also be made up in some more stable knits such as minky, suede cloth, and low-pile furs. The arms and legs are all attached in seams and the body is carefully shaped and sized to match that of a standard 18” dolls. The face is finished simply with two button eyes, but the basic design lends itself well to a wide variety of creative adaptations to give it a unique and personal look.

PDF sewing pattern by Thimbles and Acorns.

Pattern #2020-15
PDF Pattern for 18 inch Rabbit Doll

Recommended Fabrics: Main Fabric and Contrast Fabric for 18” Rabbit Doll in medium to slightly heavy weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, moleskin, terry cloth, velour, velveteen, or denim. Low stretch knit fabrics such as Ultrasuede®, minky, fleece, and low pile faux furs can also be used. Main Fabric and Contrast Fabric for 6” Mini Rabbit Doll in lighter to medium weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, ultra suede, and moleskin. Low stretch low pile knit fabrics such as Ultrasuede® and single sided minky can also be used.

Supplies Needed:
Fabric:

• Main Fabric - 1/2 yard 45” wide fabric
• Contrast Fabric - 1/3 yard 45” wide fabric
• Nose Fabric ~ 3” square of fabric

Notions:

• Thread
• Polyester stuffing

18” Rabbit Doll

• Two 3/8” - 5/8” buttons for eyes (9 - 15 mm safety eyes can be used, if preferred)
• Buttonhole thread for attaching eyes

6” Mini Rabbit Doll

• Two 1/4” buttons for eyes (6 mm safety eyes can be used, if preferred)
• Buttonhole thread for attaching eyes
• Embroidery Floss for nose (optional)

Tools:

• Sewing machine
• Scissors
• Seam ripper
• Pins
• Hand sewing needle
• Long doll sculpting type needle
• Fabric Marker
• Ruler
• Iron and pressing tools
• Blunt needle or point turner
• Stuffing tool such as a pencil or chopstick
• Straw and bobby pin for turning the arms and legs on the 6” Mini Doll

Skill Level:  Intermediate

What You Get: One 25 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Thimbles and Acorns
Type: Cloth doll
Price: 7.99

This adorable Frog Doll is specifically designed to fit in standard 18” doll clothes and shoes. This means your Frog Doll can share your 18” doll's wardrobe. As an added bonus, a 6” mini version is included with this pattern that is just the right size for your 18” doll to play with! This 6” doll fits in the outfits included in Thimbles and Acorns Charlotte and Pandora doll patterns as well as most of the 6” and 8” doll outfits found in the larougetdelisle catalog.

The simple design of the Frog doll means it sews up quickly and adapts well to a variety of medium weight woven fabrics. It can also be made up in some more stable knits such as minky, suede cloth, and low-pile furs. The arms and legs are all attached in seams and the body is carefully shaped and sized to match that of a standard 18” dolls. The face is finished simply with two button eyes, but the basic design lends itself well to a wide variety of creative adaptations to give it a unique and personal look.

PDF sewing pattern by Thimbles and Acorns.

Pattern #2020-14
PDF Pattern for 18 inch Frog Doll

Recommended Fabrics: Main Fabric and Contrast Fabric for 18” Frog Doll in medium to slightly heavy weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, moleskin, terry cloth, velour, velveteen, or denim. Low stretch knit fabrics such as Ultrasuede®, minky, fleece, and low pile faux furs can also be used. Main Fabric and Contrast Fabric for 6” Mini Frog Doll in lighter to medium weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, ultra suede, and moleskin. Low stretch low pile knit fabrics such as Ultrasuede® and single sided minky can also be used.

Supplies Needed:
Fabric:

• Main Fabric - 1/2 yard 45” wide fabric
• Contrast Fabric - 1/3 yard 45” wide fabric

Notions:

• Thread
• Polyester stuffing

18” Frog Doll

• Two 5/8” - 3/4” buttons for eyes
• Buttonhole thread for attaching eyes
• Embroidery Floss for nose

6” Mini Frog Doll

• Two 1/4 - 3/8” buttons for eyes
• Buttonhole thread for attaching eyes
• Embroidery Floss for nose

Tools:

• Sewing machine
• Scissors
• Seam ripper
• Pins
• Hand sewing needle
• Long doll sculpting type needle
• Fabric Marker
• Ruler
• Iron and pressing tools
• Blunt needle or point turner
• Stuffing tool such as a pencil or chopstick
• Straw and bobby pin for turning the arms and legs on the 6” Mini Doll

Skill Level:  Intermediate

What You Get: One 22 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Thimbles and Acorns
Type: Cloth doll
Price: 7.99

This adorable Elephant Doll is specifically designed to fit in standard 18” doll clothes and shoes. This means your Elephant Doll can share your 18” doll's wardrobe. As an added bonus, a 6” mini version is included with this pattern that is just the right size for your 18” doll to play with! This 6” doll fits in the outfits included in Thimbles and Acorns Charlotte and Pandora doll patterns as well as most of the 6” and 8” doll outfits found in the larougetdelisle catalog.

The simple design of the Elephant doll means it sews up quickly and adapts well to a variety of medium weight woven fabrics. It can also be made up in some more stable knits such as minky, suede cloth, and low-pile furs. The arms and legs are all attached in seams and the body is carefully shaped and sized to match that of a standard 18” dolls. The face is finished simply with two button eyes, but the basic design lends itself well to a wide variety of creative adaptations to give it a unique and personal look.

PDF sewing pattern by Thimbles and Acorns.

Pattern #2020-13
PDF Pattern for 18 inch Elephant Doll

Recommended Fabrics: Main Fabric and Contrast Fabric for 18” Elephant Doll in medium to slightly heavy weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, moleskin, terry cloth, velour, velveteen, or denim. Low stretch knit fabrics such as Ultrasuede®, minky, fleece, and low pile faux furs can also be used. Main Fabric and Contrast Fabric for 6” Mini Elephant Doll in lighter to medium weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, ultra suede, and moleskin. Low stretch low pile knit fabrics such as Ultrasuede® and single sided minky can also be used.

Supplies Needed:
Fabric:

• Main Fabric - 1/2 yard 45” wide fabric
• Contrast Fabric - 6” x 12” piece of fabric

Notions:

• Thread

18” Elephant Doll

• 48” of yarn for hair tufts (optional)
• 8 ounces of polyester fiberfill
• Two 3/8” - 5/8” buttons for eyes (9 - 15 mm safety eyes can be used, if preferred)
• Buttonhole thread for attaching eyes

6” Mini Elephant Doll

• 24” of yarn for hair tufts (optional)
• 1 ounce of polyester fiberfill
• Two 1/4” buttons for eyes (6 mm safety eyes can be used, if preferred)

Tools:

• Sewing machine
• Scissors
• Seam ripper
• Pins
• Hand sewing needle
• Long doll sculpting type needle
• Fabric Marker
• Ruler
• Iron and pressing tools
• Blunt needle or point turner
• Stuffing tool such as a pencil or chopstick
• Straw and bobby pin for turning the arms and legs on the 6” Mini Doll

Skill Level:  Intermediate

What You Get: One 24 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Thimbles and Acorns
Type: Cloth doll
Price: 7.99

This adorable Fox Doll is specifically designed to fit in standard 18” doll clothes and shoes. This means your Fox Doll can share your 18” doll's wardrobe. As an added bonus, a 6” mini version is included with this pattern that is just the right size for your 18” doll to play with! This 6” doll fits in the outfits included in Thimbles and Acorns Charlotte and Pandora doll patterns as well as most of the 6” and 8” doll outfits found in the larougetdelisle catalog.

The simple design of the Fox doll means it sews up quickly and adapts well to a variety of medium weight woven fabrics. It can also be made up in some more stable knits such as minky, suede cloth, and low-pile furs. The arms and legs are all attached in seams and the body is carefully shaped and sized to match that of a standard 18” dolls. The face is finished simply with two button eyes, but the basic design lends itself well to a wide variety of creative adaptations to give it a unique and personal look.

PDF sewing pattern by Thimbles and Acorns.

Pattern #2020-11
PDF Pattern for 18 inch Fox Doll

Recommended Fabrics: Main Fabric and Contrast Fabric for 18” Fox Doll in medium to slightly heavy weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, moleskin, terry cloth, velour, velveteen, or denim. Low stretch knit fabrics such as Ultrasuede®, minky, fleece, and low pile faux furs can also be used. Main Fabric and Contrast Fabric for 6” Mini Fox Doll in lighter to medium weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, ultra suede, and moleskin. Low stretch low pile knit fabrics such as Ultrasuede® and single sided minky can also be used.

Supplies Needed:
Fabric:

• Main Fabric - 1/2 yard 45” wide fabric
• Contrast Fabric - 1/3 yard 45” wide fabric
• Nose Fabric - 3” square

Notions:

• Thread
• Polyester stuffing
• Embroidery Floss for nose

18” Fox Doll

• Two 3/8” - 5/8” buttons for eyes
• Buttonhole thread for attaching eyes

6” Mini Fox Doll

• Two 1/4” buttons for eyes
• Buttonhole thread for attaching eyes

Tools:

• Sewing machine
• Scissors
• Seam ripper
• Pins
• Hand sewing needle
• Long doll sculpting type needle
• Fabric Marker
• Ruler
• Iron and pressing tools
• Blunt needle or point turner
• Stuffing tool such as a pencil or chopstick
• Straw and bobby pin for turning the arms and legs on the 6” Mini Doll

Skill Level:  Intermediate

What You Get: One 26 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Thimbles and Acorns
Type: Cloth doll
Price: 7.99

Follow along in a full sew-along tutorial with Shari in Sewing With Cinnamon & Friends!

This adorable Bear Doll is specifically designed to fit in standard 18” doll clothes and shoes. This means your Bear Doll can share your 18” doll's wardrobe. As an added bonus, a 6” mini version is included with this pattern that is just the right size for your 18” doll to play with! This 6” doll fits in the outfits included in Thimbles and Acorns Charlotte and Pandora doll patterns as well as most of the 6” and 8” doll outfits found in the larougetdelisle catalog.

The simple design of the Bear Doll means it sews up quickly and adapts well to a variety of medium weight woven fabrics. It can also be made up in some more stable knits such as minky, suede cloth, and low-pile furs. The arms and legs are all attached in seams and the body is carefully shaped and sized to match that of a standard 18” dolls. The face is finished simply with two button eyes, but the basic design lends itself well to a wide variety of creative adaptations to give it a unique and personal look.

PDF sewing pattern by Thimbles and Acorns.

Pattern #2020-12

PDF Pattern for 18 inch Bear Doll

Recommended Fabrics: Main Fabric and Contrast Fabric for 18” Bear Doll in medium to slightly heavy weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, moleskin, terry cloth, velour, velveteen, or denim. Low stretch knit fabrics such as Ultrasuede®, minky, fleece, and low pile faux furs can also be used. Main Fabric and Contrast Fabric for 6” Mini Bear Doll in lighter to medium weight fabrics such as cotton flannel, wool flannel, linen, quilting cotton, ultra suede, and moleskin. Low stretch low pile knit fabrics such as Ultrasuede® and single sided minky can also be used.

Supplies Needed:
Fabric:

• Main Fabric - 1/2 yard 45” wide fabric
• Contrast Fabric - 1/3 yard 45” wide fabric
• Nose Fabric - 3” square

Notions:

• Thread
• Polyester stuffing
• Embroidery Floss for nose

18” Bear Doll

• Two 3/8” - 5/8” buttons for eyes
• Buttonhole thread for attaching eyes

6” Mini Bear Doll

• Two 1/4” buttons for eyes
• Buttonhole thread for attaching eyes

Tools:

• Sewing machine
• Scissors
• Seam ripper
• Pins
• Hand sewing needle
• Long doll sculpting type needle
• Fabric Marker
• Ruler
• Iron and pressing tools
• Blunt needle or point turner
• Stuffing tool such as a pencil or chopstick
• Straw and bobby pin for turning the arms and legs on the 6” Mini Doll

Skill Level:  Intermediate

What You Get: One 25 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Thimbles and Acorns
Type: 18 Inch Modern
Price: 7.99

Pretend play taken to a whole new level! Make this doll-size marionette theater for you and your dolls to put on a miniature marionette performance. This 16" x 12" theater is easy to make and folds up neatly for easy storage. The unique pocket design of the walls make the cardboard wall inserts easily replaceable. The back panel has a curtain with two additional backdrop options and the stage features working curtains. As a special bonus, this pattern includes instructions for making a single point and a 5 point marionette control rod with an adjustable handle specifically designed to be held by your doll. To help get started, we've also included a short little Christmas play you can use for your first performance.

Make puppets using any of the Cute Felt Patterns or a mini cloth doll pattern such as Pandora or Charlotte from Thimbles and Acorns.

This PDF sewing pattern, by Thimbles and Acorns, is designed to be used with 18 inch dolls.

Follow along in the full video tutorial in Sewing With Cinnamon: Sewing Tiny Gifts!

Recommended Fabrics: Theater and Backdrop in medium weight cotton, muslin, sateen, or linen. Not suitable for knits. Curtain in lightweight woven or knit fabrics such as jersey, velveteen, silk, batiste, or lame.  

Supplies Needed:

Fabric:

• Theater Outer Fabric - 1 yard 45” wide fabric
• Theater Inner Fabric - 2/3 yard 45” fabric
• Backdrops - Two 12 3/4” x 10 1/2” pieces of fabric

Notions:

• Thread
• One yard 3/8” wide elastic
• 2 yards 3/8” wide ribbon
• 32” x 11 1/2” piece of 1/4” thick foam core board or corrugated cardboard
• One 16” 1/4” diameter dowel

Tools:

• Sewing machine
• Scissors
• Rotary cutter or craft knife for cutting board
• Rotary cutting pad
• Large ruler
• Fabric marker
• Pins
• Iron and pressing tools
• Blunt needle or point turner

Skill Level:  Intermediate

What You Get: One 35 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full-sized pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Genniewren
Type: 18 Inch Modern
Price: 5.99

Rosemary and Redcurrant are two cute lambs who make delightful farmyard pets for your 18" dolls. They would also be perfect for your School Nativity play, or Welsh or Highland scenes.

The lambs made from this pattern, by Genniewren Designs, are approximately 7½" tall and 11" long from tip of the nose to tip of the tail. There may be slight variations depending on the stretchiness of your chosen fabric and how you fill the toy.

Rosemary is a simple lamb, whose body is made with a single color of Sherpa-style fleece. She has contrasting hooves and her inner ears are lined with contrasting 1/16" (3mm) short pile fleece fabric, or you could use flesh-colored satin for her ear linings instead. The Sherpa-style fleece pile can be gently clipped to give her face a little more definition.

Redcurrant is a more complex creature. He is designed to be more realistic. His body and head are made from the same type of Sherpa-style fleece as Rosemary, but he has a face and lower legs cut from contrasting 1/16" (3mm) short pile fleece fabric, as well as contrasting hooves and ear linings.

Both lambs have a cute little tail, and a nose embroidered from pink floss.
The heads and bodies are the same size so that you can mix and match them to create a unique lamb should you wish to do so.

Rosemary is suitable for beginner toymakers. Redcurrant is suitable for more confident toymakers as the two-colored lamb has more seams including inset curves.

Why Rosemary and Redcurrant? Traditionally rosemary is the herb used when cooking roast lamb; while redcurrant sauce is served on the side!

Recommended Fabrics: Rosemary (the simple one-colored lamb) is designed for Sherpa-style fleece, mock sheepskin fur fabric, or textured shaggy long pile cuddle plush-style fabric such as rose swirl plush (aka Shannon Cuddle Plush® or Minky®) for the head and body; with 3mm pile plush fabric for the hooves. Redcurrant (the two-colored lamb) is designed to use Sherpa-style fleece, mock sheepskin fur fabric, or textured shaggy plush for the main body and head; with 3mm cuddle plush for the face, legs and hooves. If you use Sherpa-style fleece or mock sheepskin fur fabric, there are several different types. Please make sure that the kind you buy has a knitted or woven background, not a suede-type background. The suede backed fabric is not suitable for toymaking as it has glue between the two layers of fabric that may damage your sewing machine and it is very hard to sew by hand, even with a specialist needle designed for sewing leather. If your plush fabric frays or the backing ravels easily, then you will find it helpful to apply fusible interfacing to the back of the fabric before cutting out and sewing the lamb. The ears of both lambs can be lined with matching or contrasting 3mm pile plush fabric, or you can use flesh-colored quilter's cotton or satin fabric if you prefer.

Supplies Needed:
MATERIALS REQUIRED
Rosemary – simple one-colored lamb
- 22" x 15" of Sherpa-style fleece fabric or mock sheepskin fur fabric.
- 22" x 3" of 3mm short pile plush fabric.
- 5" x 3" cream or flesh-colored short pile plush fabric or satin.
Redcurrant – two-colored lamb
- 22" x 11" of Sherpa-style fleece or mock sheepskin fur fabric.
- 22" x 6" of 3mm short pile plush fabric.
- 22" x 3" of 3mm short pile plush fabric.
- 5" x 3" cream or flesh-colored short pile plush fabric or satin.
Plus you will need the following for either lamb:
- 8 oz (250 gram) of polyester fiberfill toy filling.
- 2 x 0.25" (6mm) safety toy eyes for each lamb (so you will need four eyes if you are making both lambs). If you cannot find safety eyes, then you can use felt dots for the eyes. If the lamb is not a toy for a child then you could also use small black buttons for the eyes.
- Extra strong thread for attaching the head to the body.
- Approximately half a yard of ribbon to tie around the finished lamb's neck.

NOTIONS AND TOOLS YOU WILL FIND HELPFUL
- Fray stopping fluid.
- Chopstick or blunt-ended knitting needle for turning and stuffing.
- A circular needle will be helpful for attaching the head.
- Teazel brush, or blunt ended tapestry needle for easing trapped fur pile out of the seams.
- Long dollmaker’s needle for sculpting the facial features and embroidering the nose and mouth.

Skill Level:  Two options: Easy (Rosemary), Intermediate (Redcurrant)

What You Get: One 57 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Via E
Type: Dollfriends
Price: 5.99

This pattern is best used with the Miskoswen (Misko) Horse pattern to add the elements of a Unicorn, wings to make a Pegasus, and to create an English saddle, reins and saddle pad. OR use this pattern to turn your favorite horse into a Unicorn or Pegasus. Sew-in or apply the accessories so they can be removed. For use with horses sized approximately 20".

Suggested Fabrics:         

Felt or feathers for wings, faux leather for the saddle, leather cord for reins, saddle pad is best with fleece, knit, faux fur-backed suede

Supplies Needed:

• Wings Option 1: 4 felt squares, 3 yard package, 14 gage wire, 1/4 yard ultra firm stabilizer 
• Wings Option 2: 1 bag 100 feathers 1 to 6”, 2 felt squares, 2 yard 14 gage wire 
• Unicorn: 1/8 yard fabric 
• Saddle: 1/2 yard fabric or leather, 1/8 yard ultra firm stabilizer, 1 square craft foam sheet, Handful of fiber fill, 2 ea 1 1/2 “ D-rings, 1 ea 1/2 “ O-ring, 1 ea 1” buckle, 2” hook and loop tape 
• Saddle Pad: 1/4 yard fabric 
• Reins: 1 1/2 yards of 3/16 “ leather cording, 4 1/2” O-rings, 14 ea 1/4 “ round metal spot, Optional: 1 ea 1” to 2” decorative metal adornment 
• If affixing wings to a pre-sewn horse: 4 ea pant hooks or 2” hook and loop tape

Skill Level: Intermediate 

What You Get: One 43 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full-size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Stitchery By Snowflake
Type: 18 Inch Historical
Price: 6.99

Mount your steed and enter the arena for the joust! Dress your horse in a bright caparison to show off the kingdom’s power and prestige. Three different decorative trim options will coordinate with your knight’s coat of arms. The horse blanket falls gracefully over the horse’s back, gathered for a perfect fit, with a gap purposefully designed for the saddle cinch. The blanket closes in front with hook and loop tape and ties in back with grommets leaving space for the horse’s tail. Rein covers go on easily with hook and loop tape. Hood has matching trim and closes with hook and loop tape. Bonus lance craft pattern included.

This PDF sewing pattern, from Stitchery by Snowflake, is designed to fit 18" doll horses such as those designed to be used with American Girl®.

Recommended Fabrics: Any woven fabric, such as cotton. Not suitable for knits.

Supplies Needed:

• 5/8 yard of woven fabric, such as Cotton
• 5/8 yard of lining fabric
• Optional: 1/4 inch double fold bias trim (Directions included to make your own!)
• Up to 1/3 yard of fabric for optional trim (i.e. stripes)
• Matching thread
• 1/2 inch wide hook and loop tape
• Two grommets, and tools to set the grommets
• Ribbon or cord
• For bonus lance: 3/8 inch dowel 18 inches long, cardstock in coordinating colors, glue stick, craft paint

Skill Level:  Confident Beginner

What You Get: One 38 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Love From Lola
Type: 18 Inch Modern
Price: 5.99

Even pets need clothes! Make your pet the best dressed with Fifi & Fido. This pattern by Love From Lola consists of two different designs to dress both girl and boy pets. This pattern will fit a wide variety of 18 inch doll sized pets.

Fifi is a simple dress with a ruffle at the back and an optional ruffle at the front legs. It is made for easy dressing as closures are located under the belly and at the front of the neck. Fifi comes in two sizes to fit pets with bellies measuring between 6 1/2 and 8 1/2 inches.

Fido consists of a pair of board shorts and a bandanna. It will fit standing pets with bellies measuring between 6 1/2 and 7 1/2 inches.

Supplies Needed:

• Fifi:
• 7 x 12 inch bit of fabric 
• Fat quarter for lining/ contrast
• 5 x 10 inch bit of tulle
• Marking Pen
• 1 inch of hook and loop
• 6 inches of trim/lace (optional)
• Fido:
• 8 x 16 inch bit of fabric
• 3 x 3 inch scrap for pocket
• 6 1/2 inches of 1/4 inch wide elastic

Skill Level:  Intermediate - While this pattern is simple to construct it has been rated as intermediate due to the small size.

What You Get: One 21 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full-size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Read Creations
Type: 18 Inch Modern
Price: 5.99

Does your doll love to go horseback riding? Then her horse needs a saddle. This English Saddle pattern from ReadCreations requires little sewing and is the perfect crafting project for any horse enthusiast. There are two different stirrup hardware options and stirrup lengths are adjustable to fit most 18" dolls and their horses. The English saddle fits most 18" doll sized horses due to its adjust-ability. Instructions on how to make a bridle and reins for your horse are also included. The bridle should also fit most 18" doll sized horses. Instructions on how to adjust for different sizes are also provided.
Your saddle would not be complete without a saddle pad. Bonus pattern and instructions on how to sew a simple saddle pad are also provided.

But wait, your doll can't go horseback riding without a Riding Jacket and Riding Pants, both patterns also available from ReadCreations.

This PDF pattern is designed to fit horses belonging to 18" dolls such as American Girl®.

Recommended Fabrics:  vinyl fabric or real leather

Supplies Needed:
Supplies needed for English Saddle
• 13" x 14" or 6" x 33" thick vinyl or real leather (3 ounce cow leather)
• (2) 9/16" x 14" pleather strap (also called single fold bias tape) found at craft stores or you can cut strips from vinyl or leather (used for stirrup straps)
• 6" x 30" thin somewhat stretchable vinyl or thick performance fabric
• Sheet of 2mm thick craft foam (8" x 11")
• (2) 3/8" D-Rings or use wire/sturdy paper clips to form (optional)
• (2) 5/8" D-Rings or use wire/sturdy paper clips to form
• (1) 5/8" buckle (or small piece of hook and loop tape)
• 4" x 5" piece of thick plastic like from a plastic gutter guard or garden edging found at home improvement stores
• Contact cement
• 3" of 3/8" grosgrain ribbon (optional, only needed with 3/8" D-Rings)
• 4" of 5/8" ribbon
• Heavy duty sewing needle or sewing needle for leather (16/100)
• Heat gun
• Zipper foot (for easier edge stitching)
• (2) 3mm metal studs (optional)
• 5/8" round wooden dowel or anything else with a 5/8" diameter, just used for shaping
• Spray paint bottle or something with a similar diameter, just used for shaping
• Rotary cutter, not required but very helpful
• Heavy duty scissors or tin snips

 
Supplies needed for Bridle and Reins
• (4) 3/8" D-Rings
• (2) jewelry clasps
• (2) small jump rings, might not be needed if you can add the jewelry clasp directly onto the D-Rings
• 3/8" x 21" thick vinyl or real leather (3 ounce cow leather) for bridle
• ½" x 6" thick vinyl or real leather (3 ounce cow leather) for bridle
• ¼" x 9" thick vinyl or real leather (3 ounce cow leather) for bridle
• 3/8" x 22" thick vinyl or real leather (3 ounce cow leather) or
22" leather braided necklace or similar, for reins
• Small pieces of hook and loop tape (optional, or use buckle)
• ¼" (8mm) metal buckle (optional, you can use hook and loop tape instead)

Supplies needed for Bonus Saddle Pad
• ¼ yard of cotton fabric
• 6" x 8" x ¼" polyester batting (needs to separate easily)
• 3" of ¼" to 3/8" grosgrain ribbon (optional)

Skill Level:  Confident Beginner

What You Get: One 51 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Genniewren
Type: 18 Inch Modern
Price: 5.99

Benjy and Blossom, by Genniewren Designs, are two adorable little bunny rabbits that are the perfectly-sized pet for your 18 inch dolls.

Made from 3mm short pile soft cuddle plush (the kind often used for baby toys), these cute little bunnies are so sweet, you just want to pick one up and hug him (or her!).

The bunnies have different personalities: Benjy’s alert look is signified by his sticky-up ears, while Blossom is more relaxed with her ears down - she's just ready to snuggle up to your doll for a great big cuddle.

Benjy and Blossom are both so cute, you will want to make each of them. Your dolls will love these new additions to the family. The pattern even includes a bonus carrot so your bunny has something to eat!

The Benjy & Blossom pattern has been designed with novice toymakers in mind. The bunnies can be sewn completely on a sewing machine, with just a small amount of hand sewing at the end (for the facial features and to attach the head and tail to the body).

All the techniques required to make and finish the bunnies are explained with clear, step by step instructions and photographs, and the pattern instructions include a section on tips and techniques for working with plush fabrics and a list of general toymaking hints and tips.

Recommended Fabrics: 3mm pile soft cuddle plush fabric (the type used for baby toys), or fur fabric for the bunny's bodies and heads. Cotton woven fabric or teeshirt fabric for the ear linings.

Supplies Needed:
MATERIALS REQUIRED:
- 10” x 16” of 3mm soft pile plush fabric will be sufficient in the main color for either bunny.
- A smaller piece (8” x 8”) of contrasting plush fabric for the tummy gussets and tail pieces.
- A 4” square of flesh pink woven fabric for the ear linings.
- A small piece of good quality pink felt for the nose (a 1” square is plenty) and a similar sized piece of black felt for the eyes.
- 8 oz (250 gram) of polyester fiberfill toy filling is sufficient to make either bunny and a carrot.
- A scrap of orange plush, felt, or fleece (4” x 4”) to make the carrot.
- A scrap of green felt (4” x 3”) to make the carrot leaves.
- Extra strong thread for attaching the head and tail to the body.

TOOLS RECOMMENDED:
- Fray stopping fluid.
- Chopstick or knitting needle for turning and stuffing.
- A long dollmaker’s or millinery needle is helpful for attaching the facial features. You may also find a circular needle useful for attaching the head and tail. If you don't have the specialist needles available, don't worry. You can still achieve great results with regular hand-sewing needles.

Skill Level:  Intermediate

What You Get: One 35 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Little Miss Muffett
Type: 18 Inch Modern
Price: 4.99

Make a cute, very quick and easy to make dog lead with three strap options; the lead is made from chain which extends to make a chain collar which loops around the dog's neck and clips back onto the lead. The neck chain sports a charm or name tag. Make straps from imitation leather, pretty patterned gross-grain ribbon, or DIY bias tape to color-coordinate an outfit. This is a must-have accessory for any puppy dog.

This PDF crafting pattern, by Little Miss Muffett, was designed to be used with 18" dolls such as American Girl® and their pets, but can be modified to fit any doll. 

Supplies Needed:
Supplies Used – I used Imitation Leather, folded Bias Tape and Gross-Grain Ribbon for the straps, size-appropriate chain for the leads, triangular jump rings removed from key chains, and charms in place of name tags.

Requirements: Supplies for Lead
Imitation Leather for Strap – 7” x 1”, or
Gross-Grain Ribbon – ¼” - ⅜” wide x 7”, or
Bias Tape - ¾” Folded x 7”
Chain – Approximately 20”
1 x Triangular Jump Ring – Base to measure ¼” - ⅜”, or
1 x Round Jump Ring – ½” diameter
4 x Split Rings – ¼” diameter
1 x Lobster Claw Clasp
1 x Charm

Sewing Requirements:
Leather Sewing Needles (Optional)
All Purpose Sewing Foot
Zipper Foot
Thread to Match Strap
Contrasting Thread

Tools:
Tape Measure
String
Clear Tape
Side Cutters
Round Nosed Pliers
Large Quilter’s Pin (Optional)
Pins
Scissors

Skill Level:  Easy

What You Get: One 15 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

PixieFaire and the designers featured are not affiliated with American Girl®.

Vendor: Dollhouse Designs
Type: 18 Inch Modern
Price: 5.99

Real horses need a lot of care. They wear special coats called Blankets and Leg Wraps to protect and warm their delicate legs. This pattern by Dollhouse Designs will create realistic looking (and great fitting) horsey apparel for your 20" Adult & 13" Foal (Baby) toy horses made by: American Girl®, Our Generation® and My Life®.

These sew up quickly in lightweight denim, cottons, wool, flannel, or other types of woven fabrics. Equines are also known to love dressing up occasionally in special finery, so lace, jewels, and silk flowers may be added to a young heart’s content.

This PDF sewing pattern includes accessories in 5 sizes to fit 3 major brands of toy horses (American Girl® - Our Generation® & My Life®). The leg wraps are shaped specifically for front and back legs. The blankets feature a strap closure underneath the horse's belly.   There are a variety of ways shown to make your creation unique.

Recommended Fabrics:  Woven fabric or large remnant- Cotton, Eyelet, Lightweight Denim & Chambray, Flannel, Quilters, etc. plus Lining Fabric for some views

Supplies Needed:
Blanket – 20” Horse -1/3 yard Woven fabric or large remnant- Cotton, Eyelet, Lightweight Denim & Chambray, Flannel, Quilters, etc.
Blanket – 13” Foal -1/4 yard or Remnant of fabrics listed above

Leg Wraps – Remnant of Woven fabric

Lining – 1/3 yard or Remnant of very lightweight silky lining fabric or lightweight cotton

Bias Tape or Trim – Blanket - 2 yards for full size 20” horses; 1 ½ yards for 13” horses

Closures - As desired. I recommend thin, non- snagging hook and loop tape 

Notions –
Ribbon, Embroidered Ribbon, Lace, Gathered Trims, etc. as desired for embellishment
Matching Thread

Skill Level:  Easy

What You Get: One 38 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Genniewren
Type: 18 Inch Modern
Price: 5.99

Socks and Smokey are two adorable little kittens that are the perfectly-sized pet cat for your 18-inch dolls.

Made from short pile soft cuddle plush (Minky® in the US, Shannon Cuddle 3 in the UK), these cute little kittens are so sweet, you just want to pick one up and hug him (or her!).

The Socks & Smokey PDF sewing pattern, by Genniewren Designs, has been designed with novice toymakers in mind. Smokey is the slightly easier option as her body is made up of only four pieces. Socks has separate additional pattern pieces for the white paws and tail tip. Other than that, the kittens are made in exactly the same way, although Socks has contrast inner ears and a contrasting nose.

The required techniques to make and finish the kittens are all explained with step by step photographs.

Socks and Smokey are so adorable, your dolls will love these new additions to the family. You won't want to stop at making just one cat, you'll need a whole litter of these cute little kittens.

Recommended Fabrics:  Minky®, Shannon Cuddleplush 3mm pile, short pile fun fur fabric, stretch velvet. 

Supplies Needed:
MATERIALS REQUIRED:
-A third of a yard of 3mm cuddle plush type fabric e.g. Shannon Cuddle3 (also known as Minky® in the USA) for either kitten. If you buy precut pieces, then 10” x 30” or 24” x 12” will be sufficient in the main color for either kitten.
-A small piece (24” x 4”) of contrasting cuddle plush type fabric for the contrast paws, inner ears, nose and tail tip for Socks only.
-8 oz (250 gram) of polyester fiberfill toy filling is sufficient to make either kitten.
-A small piece of good quality pink felt for the nose (a 1” square is plenty) and a similar sized piece of green felt for the eyes.
-One 1/2" (13mm) rhinestone slider (buckle) for the collar.(You may find this near the fold over elastic (FOE) used to make baby headbands or in the cardmaking section of your favorite hobby store).
-Approximately 7” of 3/8” (9mm) wide grosgrain ribbon for the collar, or
-Half a yard (45 cm) of 1” wide ribbon for a bow around the neck.
-Extra strong thread for attaching the head to the body and to create the whiskers.
-Fray Check™
-Chopstick or knitting needle for turning and stuffing
-Long dollmaker’s needle for attaching eyes and sculpting the face (approx 3” is a good size)
-You may also find a circular needle helpful for attaching the head.

Skill Level:  Intermediate

What You Get: One 32 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: 18 On Main
Type: 18 Inch Modern
Price: 5.99

You don’t need to be a cowboy to have a zoo of animals to feed. Pets in the city and on the farm need a good meal of corn, oats and honey. You can choose a fabric or paper bag to make a perfect gift for your pet lover’s holiday. This set includes pet food bags for a horse, cow, pig, rabbit, chicken, dog and cat.
Four printable label sets are included in this PDF pattern to allow you to decide which type of pet owner you want to be. There is the classic Retro Style that will remind you of 30’s style prairie dresses made from calico cloth and muslin feed sacks. A totally up-to-date Modern Style plays with current culture. How about a totally Organic Style that features naturally healthy ingredients? Finally all three sets have been reduced in scale to allow them to work with the popular Mini Dolls and Breyer® style stable horses. That’s 48 labels for you to mix, match and imagine with!
Need more? The Retro and Modern Styles can be totally customized by you! Sixteen labels can be personalized to include your child’s name, beloved family pet’s name or even the family’s last name!! Name your cat food after your kitten, or your bunny food after your family business. Your puppy will know he’s a good dog when he sees the dog food named after him!!
With simple sewing and a few supplies, it is easy to make a perfect and personalized birthday or Christmas gift for each child on your list. Labels are printed onto t-shirt transfer sheets and computer printer fabric sheets. Boxes have a computer printed template to take out all the measuring and work well with scrapbook paper and light weight cardstocks.
Bon Appétit!!

Recommended Fabrics:  A muslin or light colored cotton for larger feed bags. Small scale calico prints for an authentic feed sack look.

Supplies Needed:
-small fabric selections - muslin & prints
-Iron-on T-shirt Transfers for Dark Fabric
-Computer Printer Fabric Sheets (optional)
-polyfill stuffing
-hemp twine or embroidery floss for bag ties
-colored seam binding
-lightweight cardstock or scrapbook paper
-matching thread
-large eyed darning needle
-glue stick and clear drying glue

Skill Level: Easy

What You Get: One 27 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Genniewren
Type: 18 Inch Modern
Price: 5.99

Lucky is a cute little Labrador puppy, by Genniewren Designs, that’s the perfectly-sized pet for your 18 inch dolls.

Made from short pile soft cuddle plush (Minky® in the US, Shannon Cuddle 3 in the UK) this adorable little pup is so sweet you just want to hug him (or her!).

The bonus dog bed can be made from fleece or any soft stretchy fabric, e.g. fleece or stretch velvet. It has plenty of room for two puppies to share.

The Lucky Labrador Puppy pattern has been designed with novice toymakers in mind. The body has only four main pattern pieces, and the head has three main pieces.

The required techniques to finish the puppy are all explained with detailed step by step photographs inside the PDF sewing pattern.

NOTE: The finished puppy is approximately 4" (10 cm) tall and he measures approximately 7½" (19.5 cm)from the tip of his nose to the tip of his tail.

Recommended Fabrics:  Puppy- 3mm pile cuddle plush fabric (e.g. Minky®); Dog Bed - fleece, stretch velvet, cuddle plus fabric, fur fabric. 

Skill Level: Easy to Intermediate

What You Get: One 35 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: 18 On Main
Type: 18 Inch Modern
Price: 4.99

So you want to take your Poodle to a Pet Parade?
Maybe your Bulldog wants to go to the Circus?
Or you might have a new Dachshund puppy yearning for a play date.
Halloween or any day, your pets will love wearing the one-piece, easy to make, Hot Dog! Pet Costume. Simple hook and loop tape closures ensure that even the youngest pet owner will be able to dress their dogs and cats with ease. No worries about picnic spills when you are out walking your dog in the park with easy rick rack mustard trim.  

So if you have a simple Labrador or a fancy meatloaf, chocolate chip, coconut, honey, sugar, pepper, or bonbon; remember, what they all really want ….. is to be the next Top HOT DOG!

The Hot Dog PDF sewing pattern can be sewn with nearly any woven fabric. Cotton works great! I’ve sewn it in flannel for a fun textured look. I have even sewn the hot dog in a faux red leather!! So many chances to have fun!

Supplies Needed:
-three 12" squares of fabric
-polyfill stuffing
-6" of 5/8” medium rick rack trim
-2” hook and loop tape strip
-matching threads

Skill Level:  Easy

What You Get: One 23 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Peppermintsticks
Type: 18 Inch Modern
Price: 5.99

Your 18” doll will be the life of the party dressed up in the Clownin’ Around! costume by Peppermintsticks. This classic clown isn’t scary at all because we’ve added an extra serving of cute in all the details! The pattern features a loose fitting jumpsuit with raglan sleeves and elasticized ruffles at the wrists and ankles. The neckline has shirred elastic with a hook and loop tape back closure for easy dressing. Bright colors, patterns and trims will make each costume unique, right down to the floppy clown shoes. The 18” doll PDF sewing pattern includes the clown jumpsuit, a separate neck ruffle, clown hat, floppy clown shoes, and a treat bag. Pattern also includes a clown hat and neck ruffle sized to fit the American Girl ® newer Pets.  

Would you like to make one of these cute clown outfits for your 15" doll?  Click here to view the pattern.

Recommended Fabrics:  Light to medium weight woven cotton fabrics: such as quilting cottons or broadcloth

Supplies Needed:
Clown Jumpsuit, Neck Ruffle & Hat:
-½ yard for 1 color only or
-½ yard each for 2 colors
-Light to medium weight woven fabrics such as: quilting cottons, and broadcloth
-Thread
-9” of ¼” wide soft stretch elastic (neckline)
-33” total of ⅛” wide soft stretch elastic (2 x 4” sleeves, 2 x 5” ankles, 8” hat, 7” neck ruffle)
-5” of hook and loop tape
-4 pom poms
-Fusible interfacing-extra firm
-Extra long needle for hand sewing
-Optional: trims such as rick rack, gems or sparkles for hat trim

Floppy Clown Shoes
-1 square of craft felt or fleece remnant
-Thread
-7½” of ¼” or ⅜” clear elastic for straps

Treat Bag
-Light-medium weight woven fabrics-2 color remnants
-Needle for hand sewing
-Optional: 3” of ¼-⅜” clear elastic for hand strap

Pet Hat and Neck Ruffle
-Light-medium weight woven fabric remnants
-13” of ⅛” wide elastic (7” neck ruffle and 6” hat)
-Fusible interfacing-extra firm
-1 small pom pom
-Optional: small bell, trims or rick rack, gems or sparkles for hat trim

Skill Level:  Intermediate

What You Get: One 51 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Peppermintsticks
Type: 18 Inch Modern
Price: 5.99

“Mom!” she called out from her bedroom. “Is my animal shirt clean? I want to wear it to the sleepover Friday.” What could be better than a favorite Friday shirt for your 18” doll? Well, how about one with a cute animal on it? The Friday Shirt PDF pattern by Peppermintsticks features a pet parade of dogs and cats. The top has ¾ length dolman sleeves, a boat neckline and ties at one side for an asymmetrical shape. The top is relaxed and comfy just like every Friday should be. Wear it during the day with leggings, at night as a sleep shirt or for beachwear, over your best swimsuit. The pattern includes a pet parade of 17 dog and cat photos that can be printed onto t-shirt transfer paper (using an ink jet printer) and ironed onto the Friday shirt. Add ribbon, beads or decorative trim to the animals to personalize the pets.

As a bonus make your American Girl Pets ® a Friday t-shirt too! The t-shirt is designed for three body styles that will fit the newer My American Girl Pets® along with the older style Pepper, ® Meatloaf, ® and Grace’s ® French Bulldog. The shirt will also fit Sophia’s® plush puppy and kitten. Hurry, Friday is just around the corner!

Recommended Fabrics:  18” Shirt: Lightweight knits only, low to moderate stretch: jersey knits, Lycra knits, upcycle t’s Pet Shirt: Light-medium weight knits: jersey knits, interlock, upcycle t’s  

Supplies Needed:
The Pet Parade Friday Shirt 18” Dolls:
-1/3 Yard fabric-Lightweight knits only, low to moderate stretch: jersey knits, Lycra knits, upcycle t’s
-Thread
-5-6” of hook and loop tape 
-1-2 Sheets of iron-on t-shirt transfer paper (Recommend for dark color shirts)
-Iron
-Items to embellish your shirts such as: ribbon, trim or beads
Pet Shirt:
-Fabric Scraps in light-medium weight knit such as: jersey knit, interlock, upcyle t’s
-Thread
-1-2” of hook and loop tape  
-Iron
-Optional for all shirts: fusible web tape-adds extra stability when working with knits

Skill Level:  Confident Beginner

What You Get: One 36 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Miche Designs
Type: 18 Inch Modern
Price: 5.99

Your 18 inch doll can carry her furry friends around in style with this pet carrier!  Get creative with colors when designing the carrier and its reversible comfy base pad.  This PDF pattern also includes instructions for a bonus leash and collar.  

Supplies Needed:
-1/3 yd. woven fabric for body
-1 scrap rip-stop fabric for body
-1 scrap faux fur fabric for base (optional)
-Thread
-Scrap tulle or 3” tulle roll
-16” zipper
-1/2” twill trim
-Double fold bias tape
-hook and loop tape
-1/2” trim, parachute buckle (size 0.5”/12mm),
-jump ring (15mm), large jewelry clasp,
-and charm for pet collar (optional)

Skill Level:  Intermediate 

What You Get: One 32 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Eden Ava
Type: 18 Inch Modern
Price: 5.99

Now you can make a snuggly pet bed for your American Girl ® Doll animals thanks to this cute PDF pattern from Eden Ava Couture! The finished bed measures 6.25 inches square and can be made in a variety of fun color combinations.

Supplies Needed:
-Fabric: 1/2 yard of cotton and quilters fleece
-Polyester fiber fill 
-double fold baby bias tape binding

Skill Level: This is a fun and easy pattern!

What You Get: One 14 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

PixieFaire and the designers featured are not affiliated with American Girl®

Vendor: Liberty Jane
Type: 18 Inch Modern
Price: 4.99

Vendor: Ardently Admire
Type: 18 Inch Modern
Price: 4.99

Ardently Admire has created a fun festive pattern for your 18 inch doll and her furry friend! With this downloadable PDF pattern you can create moose or reindeer antlers for your doll and her pet. This pattern uses felt fabric.

Supplies Needed:
-1 sheet of 9″ x 12″ felt
-Chenille Stems (pipe cleaners)
-tape
-thread
-scissors (not fabric scissors) 
-1/4″ elastic

Skill Level: This is a beginner level sewing pattern.

What You Get: One 9 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

 Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®.